- DO NOT operate
while under the influence of drugs, alcohol, or medication
- SECURE any loose
fitting jewelry or clothing, tie back long hair - they can get caught
in moving parts
- DO NOT wear flammable
clothing. Avoid permanent press and nylon clothing because of the
difficulty of putting out their fire
- DO NOT TOUCH
LIVE ELECTRICAL PARTS
- DO NOT adjust
voltage range or voltage switch while operating the welder
- DO NOT WELD NEAR
FLAMMABLE MATERIALS
- DO NOT WELD ON
DRUMS, TANKS, OR ANY CLOSED CONTAINER IF IT CONTAINED FLAMMABLE MATERIAL
- DO NOT weld on
containers or hollow castings which do not have vents
- NEVER weld without
adequate ventilation
- DO NOT pick up
hot objects. Assume that every metal objet around a weld bead or cut
line is hot
- DO NOT leave
the electrode in contact with a metal table top or any grounded surface
while machine is on
- DO NOT look at
the welding arc without adequate eye protection
- DO NOT strike
an arc without checking the area to be certain that it is free of
bystanders without safety equipment
- USE welding screens
where necessary, to prevent injury to bystanders
- REFER to instruction
manual for further information (see Studio Technician)
|
