The ABORTECH Power Chisel is used for carving wood at a faster rate than by hand. See also Hand Chisels and General Carving

• DO NOT operate while under the influence of drugs, alcohol, or medication
• SECURE any loose fitting jewelry or clothing, tie back long hair - they can get caught in moving parts
• DO NOT REMOVE any pieces of this tool other than the chisel attachments
• SECURE the workpiece to avoid serious injury
• ALWAYS USE a sharp chisel
• DISCONNECT TOOL from power source when changing chisels
• USE ONLY ARBORTECH CHISELS with this tool. DO NOT USE STANDARD CHISELS
• DO NOT USE THIS CHISEL ON ANY MATERIAL OTHER THAN WOOD
• DO NOT FORCE the tool into the wood at steep angles
• DO NOT USE the chisel as a lever to break out wood
• CHISEL SHAFTS BECOME VERY HOT during prolonged use
• REFER to instruction manual for further information (see Studio Technician)

OTHER THINGS TO REMEMBER WHEN USING THIS MACHINE:

• THE CHISELS FOR THIS TOOL ARE FOR WOOD ONLY
• To remove chisels, press the chisel locking button and remove chisel from the extension arm
• Machine oil should be regularly added to lubricate the cam. Squeeze a drop into the lubrication port every 15 minutes of operation
• Use a maximum 25º angle when removing wood
• Make sure the machine is running BEFORE contacting the material to be worked on
• This tool should be used with two hands. One hand should hold the tool body, while the other hand holds the chisel extension arm
• Use only medium pressure, as the stroke is delivered at constant power, speed and length, and will not cut faster by forcing the tool