The Agnew Research Group Materials Science and Engineering School of Engineering and Applied Science University of Virginia
The Agnew Research Group
Home Research Projects People Facilities Openings Publications Links

Publications

Archival journal publications

J.P. Hadorn, K. Hantzsche, S.Yi, J. Bohlen, D. Letzig, and S.R. Agnew, ''Texture weakening effects in Ce-containing Mg alloys,'' Metall. Mater. Trans. A, submitted and under review.

Y.J. Ro, S.R. Agnew, and R.P. Gangloff, ''Effect of Environment on Fatigue Crack Wake Dislocation Structure in Al-Cu-Mg,'' Metall. Mater. Trans. A, in press.

R.P. Mulay and S.R. Agnew, ''Hard slip mechanisms in B2 CoTi,'' Acta Mater., in press.

J.P. Hadorn and S.R. Agnew, ''A new metastable phase in dilute, hot-rolled Mg-Nd alloys,'' Mater. Sci. Eng. A, in press.

J.P. Hadorn, K. Hantzsche, S.Yi, J. Bohlen, D. Letzig, and S.R. Agnew, ''Effects of Solute and Second-Phase Particles on the Texture of Nd-Containing Mg Alloys,'' Metall. Mater. Trans. A, in press.

J.A. Wollmershauser, B. Clausen, and S.R. Agnew, ''A slip system-based kinematic hardening model Application to in-situ neutron diffraction of cyclic deformation of austenitic stainless steel,'' Int. J. Fatigue, 36 (2012) 181-193. Link

V.K. Gupta and S.R. Agnew, ''Fatigue crack surface crystallography near crack initiating particle clusters in precipitation hardened legacy and modern Al-Zn-Mg-Cu alloys,'' Int. J. Fatigue, 33 (2011) 1159-1174. Link

B. Raeisinia, S.R. Agnew, and A. Akhtar, ''Incorporation of Solid Solution Alloying Effects into Polycrystal Modeling of Mg Alloys,'' Metall. Mater. Trans. A, 42A (2011) 1418-1430. Link

R.P. Mulay, B. Clausen, and S.R. Agnew, ''In situ neutron diffraction study of the Bauschinger effect in B2 structured CoZr,'' Metall. Mater. Trans. A, 42A (2011) 60-70 Link

V.K. Gupta and S.R. Agnew, ''A simple algorithm to eliminate ambiguities in EBSD orientation map visualization and analyses: Application to fatigue crack-tips/wakes in aluminum alloys'' Microscopy and Microanalysis, 16 (2010) 831-841. Link

C. J. Neil, J.A. Wollmershauser, S.R. Agnew, B. Clausen, and C.N. Tomé, ''Modeling Lattice Strain Evolution at Finite Strains. Model Verification for Copper and Stainless Steel Using in-situ Diffraction Measurement,'' Int. J. Plasticity, 26 (2010) 1772-1791 Link

H. Wang, B. Raeisinia; P.D. Wu, S.R. Agnew, and C.N. Tomé, ''Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet,'' Int. J. Solids Structures 47 (2010) 2905-2917 Link

B. Raeisinia and S.R. Agnew, ''Using polycrystal plasticity modeling to determine the effects of grain size and solid solution additions on individual deformation mechanisms in cast Mg alloys,'' Scripta Mater.63 (2010) 731-736. Link

S.R. Agnew and J.F. Nie, ''Preface to the viewpoint set on: The current state of magnesium alloy science and technology,'' Scripta Mater. , 63 (2010) 671-673. Link

L. Wu, S.R. Agnew, Y. Ren, D.W. Brown, B. Clausen, G.M. Stoica, D.E. Fielden, H.R. Wenk, and P.K. Liaw, ''The Effects of Texture and Extension Twinning on the Low-cycle Fatigue Behavior of a Rolled Magnesium Alloy, AZ31B,'' Mater. Sci. Eng. A. 527 (2010) 7057-7067 Link

F. Zeng , S.R. Agnew, B. Raeisinia, and Ganapati R. Myneni, ''Ultrasonic Attenuation Due to Grain Boundary Scattering in Pure Niobium,'' J. Nondestructive Eval., 29 (2010) 93-103. Link

R.P. Mulay, J.A. Wollmershauser, M.A. Heisel, H. Bei, A.M. Russell and S.R. Agnew , ''X-ray diffraction study of the phase purity, order, and texture of ductile B2 intermetallics,'' Acta Mater. 58 (2010) 2788-2796. Link

J.A. Wollmershauser, C.J. Neil, and S.R. Agnew, ''Mechanisms of Ductility in B2 Intermetallics: CoTi and CoZr,'' Metall. Mater. Trans., 41 (2010) 1217. Link

C.E. Dreyer, W.V. Chiu, R.H. Wagoner, and S.R. Agnew, ''Formability of a More Randomly Textured Magnesium Alloy Sheet: Application of an Improved Warm Sheet Formability Test,'' J. Mater. Proc. Tech. , 210 (2010) 37-47. Link

R.P. Mulay and S.R. Agnew, ''The fracture behavior of B2 structured MgR intermetallics,'' Scripta Mater. , 61 (2009) 1036–1039 Link

V.K. Gupta and S.R. Agnew, ''Indexation and misorientation analysis of low quality Laue diffraction patterns,'' J. Appl. Cryst 42 (2009) 116-124. Link

G. Proust, C.N. Tomé, A. Jain and S.R. Agnew, ''Modeling the Effect of Twinning and Detwinning During Strain-Path Changes of Magnesium Alloy AZ31,'' Inter. J. Plasticity, 25 (2009) 861-880. Link

C.J. Neil and S.R. Agnew, ''Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B,'' Inter. J. Plasticity. 25 (2009) 379-398. Link

J.A. Wollmershauser, S. Kabra, and S.R. Agnew, ''In-situ neutron diffraction study of the plastic deformation mechanisms of B2 ordered intermetallic alloys: NiAl, CuZn, & CeAg,'' Acta Mater., 57 (2009) 213-223. Link

U. Komaragiri, S.R. Agnew, R.P. Gangloff, and M.R. Begley, ''The role of macroscopic hardening and individual length-scales on crack tip stress elevation from phenomenological strain gradient plasticity,'' J. Mech. Phys. Solids, 56 (2008) 3527-3540. Link

L. Wu, S.R. Agnew, D.W. Brown, G.M. Stoica, B. Clausen, A. Jain, D.E. Fielden, P.K. Liaw, ''Internal-stress relaxation and load redistribution during the twinning-detwinning dominated cyclic deformation of a wrought magnesium alloy, ZK60A,'' Acta Mater., 56 (2008) 3699-3707. Link

B. Clausen, C.N. Tomé, D.W. Brown, and S.R. Agnew, ''Reorientation and Stress Relaxation due to Twinning: Modeling and Experimental Characterization for Mg,'' Acta Mater. 56 (2008) 2456-2468. Link

A. Jain, O. Duygulu, D.W. Brown, C. N. Tomé and S.R. Agnew, ''Grain Size Effects on the Tensile Properties and Deformation Mechanisms of a Magnesium Alloy, AZ31B, Sheet,'' Mater. Sci. Eng. A., 486, (2008) 545-555. Link

Y.J. Ro, S.R. Agnew, and R.P. Gangloff, ''Fatigue Crack Surface Crystallography of Al-Zn-Cu-Mg-Mn/Zr,'' Metall. Mater. Trans. A., 39A (2008) 1449-1465. Link

L. Wu, A. Jain, D.W. Brown, G.M. Stoica, S.R. Agnew, B. Clausen, D.E. Fielden, P.K. Liaw, ''Twinning-Detwinning Behavior during the Strain-Controlled Low-Cycle Fatigue Testing of a Wrought Magnesium Alloy, ZK60A,'' Acta Mater., 56 (2008) 688-695. Link

V.K. Gupta and S.R. Agnew, ''Measuring the effect of environment on fatigue crack-wake plasticity in aluminum alloy 2024 using electron backscatter diffraction,'' Mater. Sci. Eng. A, 494 (2008) 36-46. Link

Y.J. Ro, S.R. Agnew, Gary H. Bray, and R.P. Gangloff, "Environment Exposure Dependent Fatigue Crack Growth Kinetics for Al-Cu-Mg/Li," Mater. Sci. Eng. A, 468-470 (2007) 88-97 Link

Y.J. Ro, S.R. Agnew, and R.P. Gangloff, "Fatigue Crack Surface Crystallography of Precipitation Hardened Al-Cu-Mg/Li," Metall. Mater. Trans. A, 38 (2007)3042-3062 Link

L. Wu, G.M. Stoica, H.-H. Liao, S.R. Agnew, E.A. Payzant, G. Wang, D.E. Fielden, L. Chen, and P.K. Liaw, "Fatigue-Property Enhancements of Magnesium Alloy, AZ31B, through Equal-Channel-Angular Pressing (ECAP)", Metall. Mater. Trans. A.38 (2007) 2283-2289 Link

J. Bohlen, M.R. Nürnberg, J.W. Senn, D. Letzig, and S.R. Agnew, "The Texture and Anisotropy of Magnesium-Zinc-Rare Earth Alloy Sheets", Acta Mater., 55 (2007) 2101-2112.

A. Jain and S.R. Agnew, "Modeling the Temperature Dependent Effect of Twinning on the Behavior of Magnesium Alloy AZ31B Sheet," Mater. Sci. Eng. A, in press.

R.H. Wagoner, X.Y. Lou, M. Li, R.K. Boger and S.R. Agnew, "Forming behavior of magnesium sheet," J. Mater. Proc. Tech., 177 (2006) 483-485.

X.Y. Lou, M. Li, R.K. Boger, S.R. Agnew, and R.H. Wagoner, "Hardening Evolution of AZ31B Mg Sheet," Inter. J. Plasticity, 23 (2007) 44-86.

Y.J. Ro, M.R. Begley, R.P. Gangloff, and S.R. Agnew, "Effect of Aging on Scale-Dependent Plasticity in Aluminum Alloy 2024 and Implications for Cracking Behavior," Mater. Sci. Eng. A., 435, 333-342 (2006).

P. Mehrotra, T.M. Lillo, and S.R. Agnew, "Ductility enhancement of a heat-treatable magnesium alloy," Scripta Mater., 55 (2006) 855-858.

S.R. Agnew, D.W. Brown, and C.N. Tomé, "Validating a Polycrystal Model for the Elasto-Plastic Response of Magnesium Alloy AZ31 Using In-situ Neutron Diffraction," Acta Mater., 54 (2006) 4841-4852.

S.R. Agnew, J.W. Senn, and J.A. Horton, "Mg Sheet Metal Forming: Lessons Learned from deep drawing Li and Y Solid-Solution Alloys," JOM, 58 (5) (2006) 62-69.

S.R. Agnew, P. Mehrotra, T.M. Lillo, G.M. Stoica, and P.K. Liaw, "Crystallographic Texture Evolution of Three Wrought Magnesium Alloys During Equal Channel Angular Extrusion," Mat. Sci. Eng. A, 408 (2005) 72-78.

S.R. Agnew, P. Mehrotra, T.M. Lillo, G.M. Stoica, and P.K. Liaw, "Texture Evolution of Five Wrought Magnesium Alloys During Route A Equal Channel Angular Extrusion: Experiments and Simulations" Acta Mater., 53 (2005) 3135-3146.

D.W. Brown, S.R. Agnew, M.A.M. Bourke, T.M. Holden, S.C. Vogel and C.N. Tomé, "Internal Strain and Texture Evolution During Deformation Twinning in Magnesium," Mat. Sci. Eng. A., 399 (2005) 1-12.

S.R. Agnew and O. Duygulu, "Plastic Anisotropy and the Role of Non-basal Slip in Magnesium Alloy AZ31," Inter. J. Plasticity, 21 (2005) 1161-1193.

Y.J. Ro, S.R. Agnew and R.P. Gangloff, "Uncertainty in the determination of fatigue crack facet crystallography," Scripta Mater., 52 (2005) 531-536.

S.R. Agnew, J.A. Horton, T.M. Lillo and D.W. Brown, "Enhanced Ductility in Strongly Textured Magnesium Produced by Equal Channel Angular (ECA) Processing," Scripta Mater. 50 (2004) 377-381.

S.R. Agnew, "Wrought Magnesium: A 21st Century Outlook", JOM 56 (5) (2004) 20-21.

S.R. Agnew, F. Zeng, and G.R. Myneni, "Ultrasonic Velocity and Texture of High RRR Niobium," Materiaux et Techniques, No. 7-8-9 (2003) 38-44.

S. R. Agnew and T. Leonhardt, "Low Temperature Mechanical Behavior of a Molybdenum-Rhenium Alloy," JOM 55 (10) (2003) 25-29.

S.R. Agnew, C.N. Tomé, D.W. Brown, T.M. Holden, and S.C. Vogel, "Study of Slip Mechanisms in a Magnesium Alloy by Neutron Diffraction and Modeling", Scripta Mater., 48 (2003) 1003-1008.

S.R. Agnew and O. Duygulu, "A Mechanistic Understanding of the Formability of Magnesium: Examining the Role of Temperature on the Deformation Mechanisms," Mat. Sci. Forum, 419-422, 177-188 (2003).

S.R. Agnew, D.W. Brown, S.C. Vogel, and T.M. Holden, "In-situ Measurement of Internal Strain Evolution During Deformation Dominated by Mechanical Twinning," Mater. Sci. Forum, 404 (2002) 747-752.

S. R. Agnew, J. A. Horton, and M. H. Yoo, "TEM Invesitgation of Dislocation Structures in Mg and Mg-Li a -Solid Solution Alloys", Metall. Mater. Trans. A, 33A, 851-858 (2002).

R. D. Field, K. T. Hartwig, C. T. Necker, J. F. Bingert, and S. R. Agnew, "Equal-Channel Angular Extrusion of Beryllium", Metall. Mater. Trans. A, 33A, 965-972 (2002).

M. H. Yoo, J. R. Morris, K. M. Ho, and S. R. Agnew, "Non-Basal Deformation Modes of HCP Metals and Alloys: Role of Dislocation Source and Mobility", Metall. Mater. Trans. A, 23A, 813-822 (2002).

S. R. Agnew, M. H. Yoo, and C. N. Tomé, "Application of Texture Simulation to Understanding Mechanical Behavior of Mg and Solid Solution Alloys Containing Li or Y", Acta Mater, 49, 4277-4289 (2001).

M. H. Yoo, S. R. Agnew, J. R. Morris, and K. M. Ho, "Non-Basal Slip Systems in H.C.P. Metals and Alloys: Source Mechanisms," Mater. Sci. Eng. A, 319-321, 87-92 (2001).

S. R. Agnew, B. R. Elliott, C. J. Youngdahl, and J. R. Weertman, "Microstructural and Mechanical behavior of Nanocrystalline Metal Compacts", Mat. Sci. Eng., A285,391-396 (2000).

S. R. Agnew, A. Y. Vinogradov, S. Hashimoto, and J. R. Weertman, "Overview of fatigue performance of Cu processed by severe plastic deformation," J. Electron. Mater., 28, 1038-1044 (1999).

B.-Q. Han, S. R. Agnew and D. C. Dunand, "High-strain-rate deformation of pure aluminum reinforced with 25% alumina submicron particles near the solidus temperature", Scripta Mater., 40, 801-808 (1999).

S. R. Agnew and J. R. Weertman, "Cyclic Softening of Ultrafine Grain Copper", Mat. Sci. Eng.,A244, 145 (1998).

S. R. Agnew and J. R. Weertman, "The Influence of Texture on the Elastic Properties of Ultrafine-Grain Copper," Mat. Sci. Eng., A242, 174 (1998).

Y.-C. Lu, S. R. Agnew, R. Dieckmann, and S. L. Sass, "Further Characterization of the Aluminum Peroxide Oxide, AlO2, Formed by Interfacial Reaction Between a-Al2O3 and Pt", Acta Metall. Mater., 43, 1885-1893 (1995).

J. H. Schneibel, S. R. Agnew, and C. A. Carmichael, "Surface Preparation and Bend Ductility of NiAl," Metall.Trans. A , 24A, 2593-2596 (1993).

Refereed Conference Proceedings

Y.J. Ro, S.R. Agnew, and R.P. Gangloff, "Environmental Exposure Dependence of Low Growth Rate Fatigue Crack Damage in Al-Cu-Li/Mg Alloys", in Proceedings, Conference on Very High Cycle Fatigue, J. Allison, J.W. Jones, J.M. Larsen and R.O. Ritchie, eds., TMS-AIME, Warrendale, PA, in press (2007).

A. Jain, D.W. Brown, and S.R. Agnew, "Twinning and Detwinning Cyclic Deformation of Mg Alloy AZ31B," Mater. Sci. Forum, 539-543 (2007), 539-543

J.W. Senn and S.R. Agnew, "Texture Randomization During Thermomechanical Processing of a Magnesium-Yttrium-Neodymium Alloy," Proc. of Magnesium Technology in the Global Age, M.O. Pekguleryuz and L.W.F. Mackenizie (Canadian Inst. Mining, Metall., & Petro., Montreal, QC, Canada: 2006) pp 115-130.

A. Jain and S.R. Agnew, "Effect of Twinning on the Mechanical Behavior of a Magnesium Alloy Sheet During Strain Path Changes," Magnesium Technology 2006, Eds. A. Luo, N. Nealameggham, R.S. Beals, (TMS: Warrendale, PA:2006) 219-224.

X. Lou, M. Li, R.K. Boger, S.R. Agnew and R.H. Wagoner, "Deformation of O-temper AZ31B Mg Sheet Under Monotonic and Cyclic Loading," ibid, 159-164.

D.W. Brown, S.R. Agnew, S. Abeln, W. Blumenthal, M.A.M. Burke, M. Mataya, C.N.Tomé, and S.C.Vogel, "The role of texture, temperature and strain-rate in the activity of deformation twinning," Mat. Sci. Forum, 495-497, (2005) 1037-1042.

A. Jain and S.R. Agnew, "Measuring the Temperature Dependence of the Flow Surface of Magnesium Alloy Sheet," Magnesium Tech. 2005, Eds. N.R. Nealameggham, H.I. Kaplan and B.R. Powell, (2005) 71-76.

J.A. Horton, C.A. Blue, T. Muth, A.L. Bowles, and S.R. Agnew, "Infrared Processing of Magnesium Wrought Alloys," ibid., 155-158.

S.R. Agnew and O. Duygulu, "TEM Investigation of Dislocation Mechanisms in Mg Alloy AZ31B Sheet," in Magnesium Technology 2004, Ed. A.A. Luo (TMS: Warrendale, PA:2003) pp. 61-66.

G.R. Myneni and S.R. Agnew, "Elasto-Plastic Behavior of High RRR Niobium: Effects of Crystallographic Texture, Microstruture and Hydrogen Concentration" in Proc. Hydrogen in Materials and Vacuum Systems, (American Institute of Physics: Mellville, New York: 2003) pp. 227-239.

C.N. Tomé, S.R.agnew, W.R. Blumenthal, M.A.M. Bourke, G.C. Kaschner and P. Rangaswamy, "The relation between texture, twinning and mechanical properties in low symmetry aggregates" Mat. Sci. Forum, 408-412 (2002) 263-268.

S. R. Agnew, S. Viswanathan, E. A. Payzant, Q. Han , K. C. Liu, and E. A. Kenik, "Tensile and Compressive Creep Behavior of Magnesium Die Casting Alloys Containing Aluminum", in Magnesium Alloys and Their Applications, (Werkstoff-Informationsgesellschaft: Frankfurt: 2000), 687-692. Also Advanced Engineering Materials, 2001.

S. R. Agnew, S. Viswanathan, E. A. Payzant, and K. C. Liu, "Tensile and Compressive Creep Behavior of Magnesium Die Casting Alloys Containing Aluminum", THERMEC'2000 - Proceedings International Conference on Processing and Manufacturing of Advanced Materials, Las Vegas, USA, December 2000:CDROM, Section A1, Vol 117/3.

Nonrefereed Conference Proceedings

Ozgur Duygulu and Sean R. Agnew, "Non-Basal Slip in Magnesium Alloy AZ31B Sheet at Room Temperature," Proc. 16th Inter. Microscopy Congress, Sapporo, Japan, pg. 1667.

Y.J. Ro, S.R. Agnew, R.P. Gangloff, "Fatigue Crack Surface Crystallography of Precipitation Hardened Aluminum Alloys," in: Fatigue 2006, Georgia Institute of Technology, Atlanta, GA, USA, 2006, 164527 (PAPER ID).

M.R. Begley, S.R. Agnew, U. Komaragiri and R.P. Gangloff, "Hydrogen Damage in the Crack Tip Environment," in Proc. 11th Inter. Conf. on Fracture, A. Carpinteri et al., eds., Politecnico de Torino, Turin, Italy (2005) , Paper 5505.

R.P. Gangloff, S.R. Agnew, Y.J. Ro, U. Komaragiri, and M.R. Begley, "Fatigue Crack Tip Damage-Based Models in Structural Prognosis," ibid., Paper 5097.

S. R. Agnew and O. Duygulu, "Effect of Temperature on the Deformation Mechanisms of a Magnesium Alloy Sheet", in Plasticity 2003, Ed. A. S. Khan (NEAT: Fulton, MD: 2003) pp. 409-411.

O. Duygulu and S.R. Agnew, "The Effect of Temperature and Strain Rate on the Tensile Properties of Textured Magnesium Alloy AZ31B Sheet,"Magnesium Technology 2003, Ed. H. Kaplan (TMS: Warrendale, PA:2003) 237-242.

J.A. Horton, C.A. Blue and S.R. Agnew, "Plasma Arc Lamp Processing of Magnesium Alloy Sheet" ibid. 243-246.

S. R. Agnew, "Plastic Anisotropy of Magnesium Alloy AZ31B Sheet", Magnesium Technology 2002, Ed. H. Kaplan (TMS: Warrendale, PA:2002) 169-174.

S. R. Agnew, "Plastic Anisotropy of Magnesium Alloy AZ31B Sheet", Plasticity 2002, Ed. A. S. Khan and O. Lopez-Pamies (NEAT: Fulton, MD: 2002) 215-217.

S. R. Agnew, L. Chen, G. M. Stoica, and P. K. Liaw, "Equal Channel Angular Extrusion Processing of Magnesium Alloys", Ultrafine Grained Materials II, Eds. Y.T. Zhu, et al. (TMS: Warrendale, PA: 2002).

S. R. Agnew, "Measurement and Simulation of Plastic Anisotropy of Magnesium Alloy AZ31B Sheet", Modeling the Performance of Advanced Structural Materials II, Ed. D. R. Leseur and T. S. Srivatsan (TMS: Warrendale, PA: 2001) 289-294.

S. R. Agnew, T. M. Lillo, J. Macheret, G. M. Stoica, L. Chen, Y. Lu, D. Fielden, and P. K. Liaw, "Assessment of Equal Channel Angular Extrusion Processing of magnesium alloys", Magnesium Technology 2001, Ed. J. Hryn, (TMS: Warrendale, PA: 2001) 243-248.

E. A. Payzant, S. R. Agnew, Q. Han, and S. Viswanathan, " Mg17Al12 Phase Precipitation Kinetics in Die Casting Alloys AZ91D and AM60B", ibid, 183-188.

Q. Han, E. A. Kenik, S. R. Agnew, and S. Viswanathan, "Solidification Behavior of Commercial Magnesium Alloys", ibid, 81-86.

S. R. Agnew, M. H. Yoo and J. A. Horton, "Texture Analysis as a Tool for Wrought Magnesium Alloy Development", in Magnesium Alloys and Their Applications, (Werkstoff-Informationsgesellschaft: Frankfurt: 2000), 119-124.

S. R. Agnew and M. H. Yoo, "Using Deformation-Induced Texture as an Alloy/Process Optimization Tool," Magnesium Technology 2000, Eds. H. I. Kaplan, J. Hryn, and B. Clow (TMS: Warrendale, PA: 2000) 331-340.

S. R. Agnew, K. C. Liu, E. A. Kenik and S. Viswanathan, "Tensile and Compressive Creep Behavior of Die Cast Magnesium Alloy AM60B," ibid., 285-290.

S. R. Agnew, "Texture Development During Equal Channel Angular Forging of BCC Metals", Proc. ICOTOM-12, Ed. J. A. Szpunar (NRC Reseach Press: Ottawa: Canada: 1999) pp. 575-580.

S. R. Agnew, B. R. Elliott, C. J. Youngdahl, K. J. Hemker and J. R. Weertman, "Structure and Mechanical Properties of Nanocrystalline Metals--With Opportunities for Modelling", Proc. 19th Ris� Inter. Symp. Mater. Sci., Ed. J. V. Carstensen et al., (Ris� National Laboratory: Roskilde, Denmark: 1998) 1-14.

S. R. Agnew, U. F. Kocks, K. T. Hartwig, and J. R. Weertman, "Texture Evolution During Equal Channel Angular Forging and Dislocation Boundary Misorientations After Severe Plastic Deformation", ibid., 201-206.

Book Chapters

P. Chaudhury and S.R. Agnew, "Forging of Magnesium" in the ASM Handbook 14A: Metalworking: Bulk Forming (ASM International: Metals Park, OH: 2005) pp. 318-323.

A.Yu. Vinogradov and S.R. Agnew, "Fatigue of Nanocrystalline Materials", in Encyclopedia of Nanoscience and Nanotechnology, (Marcel-Dekker, NewYork: 2004) pp. 2269-2288.

 

Bottom Curve