Publications

2016

  • M. L. Lim, R. Matthews, M. Oja, R. Tryon, R.G. Kelly, J. R. Scully, "Model to Predict Intergranular Corrosion Propagation in Three Dimension in AA5083-H131", Materials & Design, Vol. 96, pp.131-142(2016)
  • C. B. Crane, R.G. Kelly, R. P. Gangloff, "Crack Chemistry Control Intergranular Stress Corrosion Cracking in Sensitized Al-Mg", Corrosion, Vol. 72, No. 2, pp.242-263(2016)
  • M. L. Lim, R.G. Kelly, J. R. Scully, "Overview of Intergranular Corrosion Mechanisms, Phenomenological Observations, and Modeling of AA5083", Corrosion, Vol. 72, No. 2, pp.198-220(2016)

2015

  • M.T. Woldemedhin, J. Srinivasan, R.G. Kelly, "Effects of Environmental Factors on Key Kinetic Parameters Relevant to Pitting Corrosion", Journal of Solid State Electrochemistry, Vol. 19, No. 12, pp.3449-3461(2015)
  • J. Srinivasan, M. J. McGrath, R.G. Kelly, "A High-Throughput Artificial Pit Technique to Measure Kinetic Parameters for Pit Stability", Journal of Electrochemical Society, Vol. 162, No. 14, pp.C725-C731(2015)
  • P. Khullar, J. V. Badilla, R.G. Kelly, "The Use of Sintered Ag/AgCl Electrode as Both Reference and Counter Electrode for Electrochemical Measurements in Thin Film Electrolytes", ECS Electrochemistry Letters, Vol. 4, No. 10, pp.C31-C33(2015)

2014

  • J. Srinivasan, R.G. Kelly, "Experimental and Modeling Studies on Mass Transport and Electrochemical Factors Influencing Stainless Steel Pitting and Repassivation", Corrosion, 70 (12) 1172-1174
  • B. E. Risteen, E. Schindelholz, R. G. Kelly, "Marine Aerosol Drop Size Effects on the Corrosion Behavior of Low Carbon Steel and High Purity Iron", Journal of the Electrochemical Society, 161 (14) C580-C586 (2014)
  • E. Schindelholz, B. E. Risteen, R. G. Kelly, "Effect of Relative Humidity on Corrosion of Steel under Sea Salt Aerosol Proxies II. MgCl2, Artificial Seawater", Journal of the Electrochemical Society, 161 (10) C460-C470 (2014)
  • E. Schindelholz, B. E. Risteen, R. G. Kelly, "Effect of Relative Humidity on Corrosion of Steel under Sea Salt Aerosol Proxies I. NaCl", Journal of the Electrochemical Society, 161 (10) C450-C459 (2014)
  • M. T. Woldemedhin, M. E. Shedd, R. G. Kelly, “Evaluation of the Maximum Pit Size Model on Stainless Steel under Atmospheric Conditions,” Journal of the Electrochemical Society, 161 (8) E1-E9 (2014)

2013

  • E. Schindelholz, L-k Tsui, R. G. Kelly, "Hygroscopic Particle Behavior Studied by Interdigitated Array Microelectrode Impedance Sensors,” The Journal of Physical Chemistry, Part A, (2013), Vol 118, No.1, pp. 167-177
  • N. Birbilis, R. Zhang, M.L.C. Lim, R.K. Gupta, C.H.J. Davies, S.P. Lynch, R.G. Kelly, J.R. Scully, "Quantification of Sensitization in AA5083-H131 via Imaging Ga-Embrittled Fracture Surfaces," Corrosion: April (2013), Vol. 69, No. 4, pp. 396-402.
  • D. Mizuno, R. G. Kelly, “Galvanically Induced Intergranular Corrosion of AA5083-H131 Under Atmospheric Exposure Conditions - Part II – Modeling of the Damage Distribution,” Corrosion, 69, No. 7, pp. 681-692 (2013).
  • D. Mizuno, R. G. Kelly, “Galvanically Induced Intergranular Corrosion of AA5083-H131 Under Atmospheric Exposure Conditions - Part I – Experimental Characterization,” Corrosion, Vol. 69, No. 6, pp. 580-592 (2013).
  • E. Schindelholz, R.G. Kelly, I.S. Cole, W.D. Ganther, T.H. Muster, “Comparability and accuracy of time of wetness sensing methods relevant for atmospheric corrosion,” Corrosion Science, 67 233–241 (2013)
  • M.L.C. Lim, J.R. Scully, R.G. Kelly, "Intergranular Corrosion Penetration in an Al-Mg Alloy as a Function of Electrochemical and Metallurgical Conditions," Corrosion, No. 1, pp. 35-47 (2013).

2012

  • E. Rouya, S. Cattarin, M. L. Reed, R. G. Kelly, and G. Zangari, "Electrochemical Characterization of the Surface Area of Nanoporous Gold Films," Journal of the Electrochemical Society 159 K97 (2012).
  • Y. Wan, E.B. Macha, R. G. Kelly, “Modification of ASTM B117 Salt Spray Corrosion Test and Its Correlation to Field Measurements of Silver Corrosion,” Corrosion, 68 (3), 03001 (2012).

2010

  • D. Liang, H. C. Allen, G. S. Frankel, Z. Y. Chen, R. G. Kelly, Y. Wu, B. E. Wyslouzil, “Effects of Sodium Chloride Particles, Ozone, UV, and Relative Humidity on Atmospheric Corrosion of Silver,” Journal of the Electrochemical Society, 157 C146-C156 (2010).
  • S. A. Policastro, J. C. Carnahan, G. Zangari, H. Bart-Smith, E. Seker, M. R. Begley, M. L. Reed, P. F. Reynolds, R. G. Kelly, “Surface Diffusion and Dissolution Kinetics in the Electrolyte-Metal Interface,” Journal of the Electrochemical Society, 157(10) C328-C337 (2010).
  • E. Rouya, G. R. Stafford, C. Beauchamp, J. A. Floro, R.G. Kelly, M. L. Reed, G. Zangari, "In Situ Stress Measurements during Electrodeposition of Au–Ni Alloys," Electrochemical and Solid-State Letters (2010), 13(11), D87-D90.
  • E. Rouya, J. J. Mallett, P. Salvi, M. Villa, M. Begley, R. G. Kelly, M. Reed, G. Zangari, "Nanoporous Nickel by Electrochemical Dealloying," Transactions of the Materials Research Society of Japan (2010), 35(1), 23-26.
  • E, Rouya, G. R. Stafford, U. Bertocci, J. J. Mallett, R. Schad, R. Begley, R. G. Kelly, M. L. Reed, G. Zangari, "Electrodeposition of Metastable Au-Ni Alloys," Journal of the Electrochemical Society (2010), 157(7).
  • Z.Y. Chen, D. Liang, G. Ma, G. S. Frankel, H. C. Allen, R. G. Kelly, "Influence of UV irradiation and ozone on atmospheric corrosion of bare silver," Corrosion Engineering, Science and Technology, 45(2), 169-180 (2010).
  • Z. Y. Chen, R. G. Kelly, “Calculations of the Cathodic Current Delivery Capacity and Stability of Pit Size on Stainless Steel in Atmospheric Environments,” Journal of the Electrochemical Society (2010), 157(2), C69-C78.
  • E. Schindelholz, R. G. Kelly, “Application of Inkjet Printing for Depositing Salt Prior to Atmospheric Corrosion Testing,” Electrochemical and Solid-State Letters 13(10), C29-C31, (2010).

2008

  • P. E. Hopkins, P. M. Norris, L. M. Phinney, S. A. Policastro, and R. G. Kelly, "Thermal Conductivity in Nanoporous Gold Films during Electron-Phonon Nonequilibrium," Journal of Nanomaterials (2008), Article ID 418050, 7 Pages.
  • Z. Y. Chen, F. Cui, R. G. Kelly, “Calculations of the Cathodic Current Delivery Capacity and Stability of Crevice Corrosion under Atmospheric Environments,” Journal of the Electrochemical Society (2008), 155(7), C360-C368.
  • E. Seker, J. T. Gaskins, H. Bart-Smith, J. Zhu, M. L. Reed, G. Zangari, R. G. Kelly, M. R. Begley, ” The Effects of Annealing prior to Dealloying on the Mechanical Properties of Nanoporous Gold Microbeams,” Acta Materialia, 56(3), 324-332 (2008).
  • J. R. Scully, F. Presuel-Moreno, M. Goldman, R. G. Kelly, N. Tailleart, “User-selectable Barrier, Sacrificial Anode, and Active Corrosion Inhibiting Properties of Al-Co-Ce Alloys for Coating Applications,” Corrosion, 64(3), 210-229 (2008).

2007

  • C. D. Taylor, R. G. Kelly, M. Neurock, “First-Principles Prediction of Equilibrium Potentials for Water Activation by a Series of Metals,” Journal of the Electrochemical Society, 154(12), F217-F221 (2007).
  • O. Schneider, G. O. Ilevbare, R. G. Kelly, J. R. Scully, “In-situ Confocal Laser Scanning Microscopy of AA2024-T3 Corrosion Metrology III. Underfilm Corrosion of Epoxy-Coated AA2024-T3,” Journal of the Electrochemical Society, 154(8), C397-C410 (2007).
  • E. Seker, J. T. Gaskins, H. Bart-Smith, J. Zhu, M. L. Reed, G. Zangari, R. G. Kelly, M. R. Begley, “The Effects of Post-fabrication Annealing on the Mechanical Properties of Free-standing Nanoporous Gold Structures,” Acta Materialia, 55(14), 4593-4602 (2007).
  • O. M. Schneider, G. O. Ilevbare, J. R. Scully, R. G. Kelly, “Localized Coating Failure of Epoxy-coated Aluminium Alloy 2024-T3 in 0.5 M NaCl Solutions: Correlations among Coating Property Degradation, Blister Formation, and Local Chemistry within Blisters,” Journal of Electrochemical Society, 154(8), C397-C410 (2007).
  • Z. Y. Chen, R. G. Kelly, “An Analytical Modeling Method for Calculating the Maximum Cathode Current Deliverable by a Circular Cathode under Atmospheric Exposure,” in Simulation of Electrochemical Processes II, V. G. DeGiorgi, C. A. Brebbia, R. A. Adey, eds., WIT Press, Boston, pp. 33-42 (2007).
  • K. R. Cooper, R. G. Kelly, “Crack Tip Chemistry and Electrochemistry of Environmental Cracks in AA7050,” Corrosion Science, 49, 2636–2662 (2007).
  • C. D. Taylor, R. G. Kelly, M Neurock, “Theoretical Analysis of the Nature of Hydrogen at the Electrochemical Interface between Water and a Ni(111) Single-Crystal Electrode,” Journal of Electrochemical Society, 154, F55 (2007).
  • C. D. Taylor, M. J. Janik, M. Neurock, R. G. Kelly, "Ab initio Simulations of the Electrochemical Activation of Water," Molecular Simulation, 33(4-5), 429-436 (2007).
  • O. M. Schneider, R. G. Kelly, “Localized Coating Failure of Epoxy-coated Aluminium Alloy 2024-T3 in 0.5 M NaCl Solutions: Correlation between Coating Degradation, Blister Formation and Local Chemistry within Blisters,” Corrosion Science, 49, 594–619 (2007).

2006

  • J. Zhu, E. Seker, H. Bart-Smith, M. R. Begley, M. Reed, R. G. Kelly, G. Zangari, W. Lye, “Mitigation of Tensile Failure in Released Nanoporous Microstructures via Thermal Treatment, Appl Phys Lett, 89, 133104 (2006).
  • C. Taylor, R. G. Kelly, M. Neurock, “First-Principles Calculations of the Electrochemical Reactions of Water at an Immersed Ni(111)/H2O Interface,” Journal of Electrochemical Society, 153 (12) E207-E214 (2006).
  • F. J. Presuel-Moreno, H. Wang, M. A. Jakab, R. G. Kelly, J. R. Scully, “Computational Modeling of Active Corrosion Inhibitor Release from an Al-Co-Ce Metallic Coating Protection of Exposed AA2024-T3,” Journal of Electrochemical Society, 153(11) B486-B498 (2006).
  • F. Cui, F. J. Preseul-Moreno, R. G. Kelly, “Experimental and Computational Evaluation of the Protection Provided by an Aluminum Cladding to AA2024-T3 Exposed at a Seacoast Environment,” Corrosion, 62(3), 251-263 (2006).
  • F. Gui, R. G. Kelly, “A Study of Performance of Corrosion Prevention Compounds on AA2024-T3 with Electrochemical Impedance Spectroscopy,” Electrochimica Acta,51(8-9), 1797-1805 (2006).

2005

  • F. Cui, F. J. Preseul-Moreno, R. G. Kelly, “Computational Modeling of Cathodic Limitations on Localized Corrosion of Wetted SS 316L at Room Temperature,” Corrosion Science, 47, 987–3005 (2005).
  • F. J. Preseul-Moreno, M. E. Goldman, R. G. Kelly, J. R. Scully, “Electrochemical Sacrificial Cathodic Prevention Provided by an Al-Co-Ce Metal Coating Coupled to AA2024-T3,”, Journal of Electrochemical Society, 152(8), B302-B310 (2005).
  • K. R. Cooper, R. G. Kelly, “Measurement and Modeling of Crack Conditions During the Environment-Assisted Cracking of an Al-Zn-Mg-Cu Alloy,” in Environmentally Induced Cracking of Materials II, S. Shipilov, ed., Elsevier, 335-344 (2005).
  • M. P. Ciccone, R. P. Gangloff, R. G. Kelly, “Test Environment Selection for Corrosion-Fatigue Testing of Aluminum Alloy 7075-T6,” Corrosion, 61(6), pp. 571-578 (2005).
  • K. R. Cooper, K. Furrow, R. G. Kelly, “Wicking and Water Displacement by Corrosion Prevention Compounds In Simulated Aircraft Aluminum Alloy Lap Joints,” Corrosion, 61 (2), pp. 155-166 (2005).
  • F. Gui, R. G. Kelly, “Performance Assessment and Prediction of Corrosion Prevention Compounds with Electrochemical Impedance Spectroscopy,” Corrosion, 61(2), pp. 119-129 (2005).

2004

  • K. R. Cooper, Y. Ma, J. P. Wikswo, R. G. Kelly, “Simultaneous Monitoring of the Corrosion Activity and Moisture inside Aircraft Lap Joints,” Corrosion Engineering, Science, and Technology,39(4), 339-345 (2004).
  • J. M. Williams, R. G. Kelly, “An Analysis of Corrosive Species Ingress into IM7/PETI-5 Ti Honeycomb Composites,” Composites Science and Technology, 64, 1875-1883 (2004).
  • G. O. Ilevbare, O. Schneider, R.G. Kelly, J.R Scully, “In-Situ Confocal Laser Scanning Microscopy Of AA2024-T3 Corrosion Metrology: 2. Trench Formation Around Particles,” Journal of Electrochemical Society, 151 (8), B465-472 (2004).
  • G. O. Ilevbare, O. Schneider, R.G. Kelly, J.R Scully, “In-Situ Confocal Laser Scanning Microscopy Of AA2024-T3 Corrosion Metrology: 1. Localized Corrosion of Particles,” Journal of Electrochemical Society, 151 (8), B453-464 (2004).
  • J. S. Lee, M. L. Reed, R. G. Kelly, “Combination of Rigorously Controlled Crevice Geometry and Computational Modeling for the Study of Crevice Corrosion Scaling Factors,” Journal of Electrochemical Society, 151 (7), B423-B433 (2004).
  • H. Wang, F. Preseul, R. G. Kelly, “Computational Modeling of Inhibitor Release and Transport from Multifunctional Organic Coatings,” Electrochimica Acta, 49/2, 239-255 (2004).

2003

  • O. Schneider, R. G. Kelly, “Localized Coating Failure of Epoxy-Coated AA2024-T3 in 0.5 M NaCl Solutions: Comparison of Conventional Electrochemical Techniques and Microelectrochemical Methods,” Corr. Eng. S&T , 38(2), 119-128 (2003).

2002

  • K. S. Ferrer, R. G. Kelly, “Development of an Aircraft Lap Joint Simulant Environment,” Corrosion, 58(5), 452-459, 2002.

2001

  • O. Schneider, G. O. Ilevbare, J. R. Scully, R. G. Kelly, “Confocal Laser Scanning Microscopy as a Tool for In Situ Monitoring of Corrosion underneath Organic Coatings,” Electrochemical and Solid-State Letters, 4(12), B35–B38, 2001.
  • K. S. Ferrer, R. G. Kelly, "Comparison of Methods for Removal of Corrosion Products from AA2024-T3," Corrosion, 57, 110-117 (2001).

2000

  • G. O. Ilevbare, J. Yuan, R. G. Kelly, J. R. Scully, "Inhibition of the Corrosion of AA 2024: Chromate Conversion Coating versus Chromate Additions," Corrosion, 56(3), 227-242 (2000).

1999

  • A. M. Mierisch, J. Yuan, R. G. Kelly, S. R. Taylor, “Probing Coating Degradation Using Local Chemical and Electrochemical Techniques, Journal of Electrochemical Society, 146(12), 4449-4454 (1999).
  • K. R. Cooper, R. G. Kelly, “Using Capillary Electrophoresis to Study the Chemical Conditions Within Cracks in Al Alloys,” Journal of Chromatography A, 850, 381-9 (1999).
  • R. G. Kelly, J. Yuan, C. M. Weyant, K. S. Lewis, “Capillary Electrophoresis Applications in Corrosion Science and Engineering,” Journal of Chromatography A, 834, 433-444 (1999).

1998

  • C. S. Brossia, R. G. Kelly, “Occluded Chemistry Control and the Effects of Alloy Sulfur in the Initiation of Crevice Corrosion of Austenitic Stainless Steel,” Corrosion Science, 40, 1851-1871 (1998).
  • C. S. Brossia, R. G. Kelly, “Influence of Alloy Sulfur Content and Bulk Electrolyte Composition on Crevice Corrosion Initiation of Austenitic Stainless Steel,” Corrosion, 54, 145-154 (1998).

1996

  • Z. Fei, R. G. Kelly, J. L. Hudson, “Spatiotemporal Patterns on Electrode Arrays,” J. Phys. Chem., 100(49), 18986-18991 (1996).
  • R. G. Kelly, C. S. Brossia, K. R. Cooper, J. Krol, “Analysis of Disparate Levels of Anions of Relevance to Corrosion Processes,” Journal of Chromatography A, 740, 191-98 (1996).
  • K. R. Cooper, R. G. Kelly, "Sources of Variability in Cation Analyses for Exfoliation Corrosion Resistance Test," Journal of Chromatography A, 740, 183-90 (1996).
  • R. G. Kelly, P. J. Ambrose, R. C. Wilson, K. A. Jefferies, S. Kannan, "Results of Corrosion Coupon Exposures of Ferrous Materials in Black Liquor," Tappi Journal, 79 148-154 (1996).
  • C. S. Brossia, R. G. Kelly, "A Reference Electrode for Use in Methanol Solutions," Electrochimica Acta, 41, 2579-2585 (1996).
  • S. Kannan, R. G. Kelly, "The Role of Dihydroxybenzenes in the Corrosion of Steel in Black Liquor," Corrosion Science, 38, 1051-1069 (1996).

1995

  • L. A. Pawlick, R. G. Kelly, "An Electrochemical Investigation of the Corrosion Behavior of AA5052 in Methanolic Solutions," J. Corrosion Sci. & Engr., 1(4), 1-12 (1995).
  • G. Salamat, G. A. Juhl, R. G. Kelly, "The Mechanism of Dissimilar Metal Crevice Corrosion in Superferritic Stainless Steel," Corrosion, 51, 826-836 (1995).
  • C. S. Brossia, E. Gileadi, R. G. Kelly, "The Electrochemistry on Iron in Methanolic Solutions and Its Relation to Corrosion," Corrosion Science, 37, 1455-1471 (1995).

1994

  • Z. Fei, J. L Hudson, R. G. Kelly, "A Low Noise Contact for Rotating Electrodes," Journal of Electrochemical Society, 141, L123-4 (1994).
  • R. P. Gangloff, R. G. Kelly, "Microbe Enhanced Fatigue Crack Propagation in HY 130 Steel," Corrosion, 50, 345-354 (1994).

1993

  • B. K. Nash, R. G. Kelly, "The Characterization of the Crevice Solution Chemistry in 304 Stainless Steel," Corrosion Science, 35, 817-825 (1993)
  • P. D. Bastek, R. C. Newman, R. G. Kelly, "Experimental Determination of the Effects of the Surrounding Passive Film on Scratched Electrode Behavior," Journal of Electrochemical Society, 140, 1884-1889 (1993).
  • R. G. Kelly, H. S. Scully, G. E. Stoner, "Corrosion of Packaged Galvanized Steel Analyzed by Capillary Electrophoresis," British Corrosion Journal, 28, 3, 1-4 (1993).
  • J. F. Dante, R. G. Kelly, "The Evolution of the Adsorbed Solution Layer During Atmospheric Corrosion and Its Effects on the Corrosion Rate of Copper," Journal of Electrochemical Society, 140, 1890-1897 (1993).
  • H. S. Scully, L. Brumback, R. G. Kelly, "Chromatographic Studies of Localized Corrosion Sites," Journal of Chromatography, 640, 345-350 (1993).

1992

  • B. K. Nash, R. G. Kelly, "Applications of Ion Chromatography to Corrosion Studies," Journal of Chromatography, 605, 135-140 (1992).
  • B. K. Nash, R. G. Kelly, "The Use of Ion Chromatography for the Study of Localized Corrosion," Journal of Electrochemical Society, 139, L48-L49 (1992).

1991

  • R. C. Newman, B. J. Webster, R. G. Kelly, "The Electrochemistry of SRB Corrosion and Related Phenomena," J. Iron and Steel Institute of Japan Intl., 31, 201-209 (1991).
  • D. E. Williams, R. C. Newman, Q. Song, R. G. Kelly, "Passivity and Passivity Breakdown of Binary Alloys," Nature, 350, 216-218 (1991).
  • R. G. Kelly, A. J. Frost, T. Shahrabi, R. C. Newman, "Brittle Fracture of an Ag/Au Alloy Induced by a Surface Film," Metall. Trans., 22A, 531-541 (1991).

1990

  • R. G. Kelly, R. C. Newman, "Confirmation of the Applicability of Scratched Electrode Techniques for the Determination of Bare Surface Current Densities," Journal of Electrochemical Society, 137, 357-358 (1990).
  • R. G. Kelly, P. J. Moran, "Passivity of Metals in Organic Solvents," Corrosion Science, 30, 495-509 (1990).

1989

  • R. G. Kelly, P. J. Moran, J. Kruger, C. Zollman, E. Gileadi, "Passivity of Fe in Anhydrous Propylene Carbonate," Journal of Electrochemical Society, 136, 3262-3269 (1989).
  • R. G. Kelly, P. J. Moran, E. Gileadi, J. Kruger, "Passivity of Fe in Mixtures of Propylene Carbonate and Water," Electrochimica Acta, 34, 823-830 (1989).

1987

  • R. G. Kelly, P. J. Moran, "The Rate limiting Mechanism in Li/I2 (P2VP) Batteries; Part II : Effect of Discharge Rate on the Contributions of the Cell Components to the Cell Impedance," Journal of Electrochemical Society, 134, 31-37 (1987).
  • R. G. Kelly, P. J. Moran, "The Rate limiting Mechanism in Li/I2 (P2VP) Batteries; Part I : Effect of Discharge Rate on the Morphology and Dimensions of the Cell Components," Journal of Electrochemical Society, 134, 25-31 (1987).

1986

  • J. R. Scully, R. G. Kelly, "A Non destructive Electrochemical Test for Detecting Intergranular Corrosion of a Duplex Steel," Corrosion, 42, 537-542 (1986).
  • L. C. Phillips, R. G. Kelly, J. W. Wagner, P. J. Moran, "An Investigation of the Volume Change Associated with Discharge of Li/I2 Batteries via Holographic Interferometry," Journal of Electrochemical Society, 133, 1-5 (1986).

1985

  • K. J. Bundy, R. G. Kelly, E. L. Brown, C. M. Delahunty, "pH Shifts Associated with Metal Ions in Tissue Culture," Biomaterials, 6, 89-96 (1985).

 

 

Copyright 2014 MSE